Publicidad
Idiomas disponibles
Idiomas disponibles
f)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
g)
To ensure the designed operational integrity of the unit, do not remove
factory-installed covers or loosen screws.
h)
Do not move, shift, or rotate the unit while in operation.
i)
Do not leave the unit switched on unattended.
j)
Clean the unit regularly to prevent permanent dirt build-up.
k)
The unit is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
l)
Do not tamper with the unit to alter its performance or design.
m) Keep the unit away from sources of fire and heat.
n)
Do not block the ventilation openings of the unit!
o)
Do not use the power supply under full load for a long time, it may cause
damage to the unit.
p)
The output voltage of the power supply should not exceed the input voltage
of the unit being powered. Too high a voltage can damage the unit.
q)
Before changing the operation mode of the power supply, first disconnect the
external load cables connected to it.
r)
If the unit is operating with an inductive load such as magnetic coils, DC
motors, stepper motors, etc., be sure to change the voltage/current slowly.
NEVER turn the power on or off with an inductive load connected.
s)
NEVER turn the power supply on or off with a load connected.
t)
Do not short-circuit wires connected to the voltage.
CAUTION!
3. Rules of use
The power supply unit is intended to supply external devices with DC current of a
specified voltage and amperage.
The user is responsible for any damage resulting from misuse.
3.1.
Description of the unit
Although the product has been designed to be safe,
with adequate safeguards, and despite the additional
safety features provided to the user, there is still a
slight risk of accident or injury when handling the unit.
You are advised to use caution and common sense
when using this product.
Publicidad
