Publicidad
Idiomas disponibles
Idiomas disponibles
FriwaMaster
4. Functions and options
4.1 Measured values
4.2 Balance values
24
|
The following values are indicated in the measured values
display:
• Domestic hot water temperature
• Draw off flow rate
• States of modules 1 to 4 (On / Off)
• State of the return connection (bottom / top)
• State of the error relay (On / Off)
• Return temperature
• Store temperature
• Temperature at S1 to S6
The measured values „domestic hot water temperature"
and „draw off flow rate" are always displayed. The values at
S1 to S6 will be displays, if the values are plausible. Only if
the return connection option is activated, will S1 (T-R) and
S2 (T-St) be displayed.
The controller has integrated registers which record the
following values:
• Operating time of the relays (1-5)
• State of the error relay
• Maximum draw off flow rate
• Minimum domestic hot water temperature
• Maximum domestic hot water temperature
• Minimum return temperature
• Maximum return temperature
• Minimum store temperature
• Maximum store temperature
All balance values are stored and maintained in the case of
power loss. The balance values can be reset.
Publicidad
