Publicidad
Idiomas disponibles
Idiomas disponibles
room temperature and humidity vary gradually to ensure the most comfortable.
When in COOL mode, the selected temperature will increase by1℃ (1°F) per hour in a 2 hour period.
This new temperature will be maintained for the next 6 hours. Then the appliance turn it off.
The SLEEP function can be canceled at any time during operation by pressing the "Sleep", "Mode" or
"fan speed" button.
In DRY mode, SLEEP function is still available.
SETTING THE TIMER
•
This timer can be used to delay the appliance startup or shutdown, this avoids wasting electricity
by optimising operating periods.
* Programming start up
•
Turn on the appliance, choose the mode you want, for example Dehumidify mode, high fan speed.
Turn off the appliance.
•
Press the "
" button , the screen starts to flash, press the " "∧" / "∨" to adjust the set time
from 0.5-24 hours.
•
In 5 seconds without the operation, the timer start function, then the "Timer" symbol lights.
•
Press the "
" button button again to cancel the Timer, and the "Timer" symbol disappear.
* Programming shut down
•
When the appliance is running, press the "
•
press the "∧" / "∨" to adjust the set time from 0.5-24 hours.
•
In 5 seconds without the operation, the timer start function, then the " Timer" symbol lights.
•
Press the "
" button again to cancel the Timer, and the " Timer " symbol disappear.
SWITCH THE UNIT OF TEMPERATURE
When the appliance is running, press the
For example:
Before change, in cool mode, the screen display like fig 1.
After change, in cool mode, the screen display like fig 2.
Fig 1
Fig 2
" button, the screen starts to flash.
button, then you can change the unit of temperature.
GB
141
Publicidad
