Loewe klang bar3 mr Guia Del Usuario página 17

Loewe klang bar3 mr

Remote control
2 Remote control
Sound Mute / Unmute.
Switches the soundbar on or switches
to standby mode.
Turns on/off the night mode.
Press and hold to turn the display on /
off (off by default). This feature displays
additional information on the front pan-
el display in certain situations.
Switches between surround sound
modes.
Press and hold to open the speaker lev-
el adjustment.
Press to change input source.
Press and hold to switch on/off DTS®
Virtual:X™ and DTS® Neural:X™.
Press and hold in standby mode to
show the software version on the dis-
play.
Sound presets - choose from preset
audio modes:
OFF, SPEECH, CLASSIC, POP, FILM,
MUSIC.
Press and hold in standby mode to ad-
just distance between listening position
and speakers.
Skip to the previous audio track in USB
/ Bluetooth / PLAY-Fi mode.
Skip to the next audio track in USB /
Bluetooth / PLAY-Fi mode.
Play/pause audio track in USB / Blue-
tooth / PLAY-Fi mode.
Press and hold to activate the pairing
function in the Bluetooth mode or dis-
connect the existing paired Bluetooth
device.
Press and hold for 8 seconds in standby
mode to restore the factory settings.
Reduce the volume level.
Increase the volume level.
Increase / decrease the treble level.
Increase / decrease the bass level.
First time use
The unit has a pre-installed lithium 2 x CR2032 bat-
tery. Remove the protective tape to activate the re-
mote control battery.
1. Press and slide the back cover to open the battery
compartment of the remote control.
2. Remove the protective tape.
3. Push the battery cover back into place.
Replacing the remote con-
trol batteries
The remote control requires 2 pcs of CR2032, 3V Lith-
ium batteries. Press and slide the back cover to open
the battery compartment of the remote control.
1. Use a tool (such as the battery compartment cov-
er) to pry up the groove between the two batteries
to remove the old batteries.
2. Insert the new batteries from the side and push
them firmly into the original battery position. Make
sure the (+) side of the battery is facing up.
3. Push the battery cover back into place
17