Rapid BTX553 Manual Del Usuario página 5

BTX553 / BTX606 BATTERY TACKER
Operating instructions - Original
Complies to relevant EU directives.
This tool is designed for use on
wood or similar materials and
should be used only for the in-
tended purposes. This tool is for
private use only.
GENERAL POWER TOOLS
SAFETY WARNINGS
WARNING!! Read all safety
warnings, instructions, illus-
trations and specifi cations
provided with this power
tool. Failure to follow all
instructions listed below may result
in electric shock, fi re and/or serious
personal injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the war-
nings refers to your mains-operated
(corded) power tool or battery-ope-
rated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and
well lit. Cluttered benches and
dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such
as in the presence of fl am-
mable liquids, gases or dust.
Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you
to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify
the plug in any way. Do not
use any adapter plugs with
earthed (grounded) power
tools. Unmodifi ed plugs and
matching outlets will reduce risk
of electric shock.
b) Avoid body contact with
earthed or grounded surfac-
es, such as pipes, radiators,
ranges and refrigerators. There
is an increased risk of electric
shock if your body is earthed or
grounded.
c) Do not expose power tools to
rain or wet conditions. Water
entering a power tool will in-
crease the risk of electric shock.
d) Do not abuse the cord. Nev-
er use the cord for carrying,
pulling or unplugging the
power tool. Keep cord away
from heat, oil, sharp edges or
moving parts. Damaged or en-
tangled cords increase the risk
of electric shock.
e) When operating a power tool
outdoors, use an extension
cord suitable for outdoor
use. Use of a cord suitable for
outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a
damp location is unavoidable,
use a residual current device
(RCD) protected supply. Use
of an RCD reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are
5