Porter Cable PCL120MT Manual De Instrucciones página 11

or changing accessories. Such preventive safety measures reduce the risk of starting
WARNING:
the tool accidentally.
immediately after operating the tool. They can become very hot. Handle carefully.
WARNING:
Always allow accessories and workpiece to cool before handling.
The PCL120MT features an exclusive tool-free accessory changing system. This allows
Installing/Removing Accessories
for faster accessory changes without the need for wrenches or hex keys like other
oscillating tool systems.
• Grasp the tool and squeeze the
accessory clamping lever as shown in
figure 5.
• Clean any residual debris from the tool
shaft and the accessory holder.
• Slide the accessory between the shaft
and the accessory holder making sure
the accessory engages all eight pins on
the holder and is flush with the shaft
(figure 6).
• Release the accessory clamp lever.
Remove battery from tool before making any assembly, adjustments
Risk of lacerations or burns. Do not touch workpiece or blade
ASSEMBLY
5
6
11