tions for international transport and
can be transported / delivered.
ATTENTION
● The device is equipped with internal
thermal protection to protect against
overheating. The device switches off
when the thermal protection is acti-
vated. Upon activation of the thermal
protection, proceed as follows:
1 Switch off the device and unplug the
charger from the mains socket.
2 Check the nozzles and inlet open-
ings for obstructions (clogging). Re-
move any obstructions if present.
3 Allow the motor to cool down for
30 minutes. Do not plug in the char-
ger. The thermal protection is deac-
tivated once the motor has cooled
down.
You must have the device serviced if
the thermal protection does not auto-
matically deactivate after performing
this step.
SAVE THESE IN-
STRUCTIONS
Hazard levels
DANGER
● Indication of an imminent threat of
danger that will lead to severe inju-
ries or even death.
WARNING
● Indication of a potentially dangerous
situation that may lead to severe inju-
ries or even death.
CAUTION
● Indication of a potentially dangerous
situation that may lead to minor inju-
ries.
4
Downloaded from
manualsnet.com
English
search engine
ATTENTION
● Indication of a potentially dangerous
situation that may lead to damage to
property.
Symbols on the device
Device type:
● 1.633-512.0
Use the following charger:
● 6.654-453.0
PS2.1
Charge the battery only using the orig-
inal charger enclosed or with a charger
approved by KÄRCHER.
WARNING - To reduce the
risk of injury, fire or explo-
sion: Read the instruction
manual
Intended use
The battery-powered appliance is de-
signed for cleaning moist, smooth sur-
faces such as windows, mirrors or tiles.
Observe the safety instructions.
● Never use the device for vacuuming
dust.
● The device can vacuum up to 0.8 oz
(25 ml) of fluid from horizontal sur-
faces, e.g. from a toppled drinking
glass.
● Only use the appliance with the fol-
lowing detergents: RM 500,
RM 503, RM 508.
● Only use the device with accesso-
ries and spare parts approved by
KÄRCHER.
All uses other than this shall be regard-
ed as not being in accordance with its
intended use. The manufacturer is not
responsible for any resultant damage;
The risk for this is borne by the user
alone.