Stanley FATMAX SFMEH220 Traducido De Las Instrucciones Originales página 8

ENGLISH
Connect the blue lead to the neutral terminal.
u
WARNING! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 10 A.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Voltage V
Frequency
Hz
Power input
W
Impact rate
bpm
Impact energy (EPTA / Max)
J
Chuck Type
kg
Weight
Level of sound pressure according to EN62841:
Sound pressure (L )
PA
Sound pressure uncertainty (K )
PA
Sound power (L )
WA
Sound power uncertainty (K )
WA
Vibration emission value ah (Chiselling):
(a )
h,CHeq
Uncertainty (K)
Declaration of conformity
The Supply of Machinery (Safety)
Regulations 2008
SFMEH220 Demolition Hammer
Stanley FatMax declares that these products described under
"technical data" are in compliance with:
EN62841-1:2015 +A11:2022, EN IEC62841-2-6:2020
+A11:2020.
8
(Original instructions)
SFMEH220
(Type 01)
SDS Max
dB(A)
dB(A)
dB(A)
dB(A)
m/s
2
m/s
2
These products conform to the following UK Regulations:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
The Noise Emission in the Environment by Equipment for use
Outdoors Regulations 2001, S.I. 2001/1701 (as amended),
Intertek Testing & Certification Ltd, Academy Place, 1-9 Brook
Street, Brentwood, Essex, CM14 5NQ, United Kingdom
Approved Body Number: 0359 LWA (measured sound power
level) 103 dB(A), uncertainty (K) = 1,8 dB (A), LWA
(guaranteed sound power) 105 dB(A).
For more information, please contact Stanley FatMax at the
following address or refer to
The undersigned is responsible for compilation of the techni-
230
declaration on behalf of Stanley FatMax.
50
1010
2900
Vice President Professional Power Tools EANZ GTS
8.5
6.3
EC declaration of conformity
95
3
103
1.8
SFMEH220 Demolition Hammer
14.3 Stanley Fat Max declares that these products described under
"technical data" are in compliance with: 2006/42/EC.
1.5
EN62841-1:2015+A11:2022, EN IEC62841-2-6:2020
These products also comply with directive 2014/30/EU, and
2000/14/EC, Electrical concrete breaker (hand-held), m ≤
15 kg, Annex VI, DEKRA Testing and Certification GmbH,
Handwerkstraße 15, 70565 Stuttgart.
Location Certification Body, Dinnendahlstr. 9, 44809 Bochum,
Germany Notified Body number: 0158 LWA (measured sound
power level) 103 dB(A), uncertainty (K) = 1,8 dB (A), LWA
(guaranteed sound power) 105 dB(A).
2008/1597 (as amended).
2012/3032 (as amended).
Schedule 9.
the back of the manual.
cal file and makes this
STANLEY FATMAX
270 Bath Road, Slough, Berkshire, SL1 4DX
%
MACHINERY DIRECTIVE
+A11:2020.
2011/65/EU.
Karl Evans
England
12.30.2022