WEG CFW300 Manual Del Usuario página 4

Summary of Reviews
The information below describes the reviews made to this manual.
Version
-
-
-
-
-
ATTENTION!
Check the frequency of the power supply.
In case the power supply frequency is different from the factory setting (check
P403), it is necessary to set:
P204 = 5 for 60 Hz.
„
P204 = 6 for 50 Hz.
„
It is only necessary to set these parameters once.
Refer to the programming manual of the CFW300 for further details about the
programming of parameter P204.
Review
R00 First edition
R01 General revision
R02 Launch of the 400 V line (T4 models, 380-480 V power supply)
R03 General revision
R04 Change of
Description
Figure B2 on page 143