CASO DESIGN Slow Juicer Manual De Instrucciones página 45

16 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
16.1 Safety information
Please observe the safety instructions, before cleaning your device
► Unplug the device when not in use and before any cleaning.
► Never immerse the motor unit, cord or plug in water or other liquids and do not place in
the dishwasher.
► Do not use iron brush, abradant kitchen cleaner, or sharp cleaning tool for cleaning.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► The juicing strainer or the sorbet strainer can be sharp, be careful during cleaning.
16.2 Cleaning
► You can use the provided cleaning brush.
► Motor unit and cable should not come into contact with water. Wipe the motor unit only
with a damp soft cloth.
► Immediately clean the device after each use. If remaining residue in the device dries up,
it can make disassembling and cleaning difficult. The residues may affect performance
in future uses.
1. You can clean all components except the motor unit (8) in the dishwasher.
Alternatively: Rinse all parts, except motor unit, thoroughly under running water and
clean with water and a mild cleaning detergent.
2. Use the cleaning brush, to clean the juice strainer and sorbet strainer thoroughly.
3. Rinse the feed auger under running water and clean the underside of the auger
thoroughly.
4. Then thoroughly clean the residue outlet, the juice outlet and lock with the cleaning
brush and remove all residues.
5. After cleaning, use a dry cloth to dry all parts thoroughly. Assemble the device
completely and store it at a dry, safe place.
17 Troubleshooting
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
17.1 Security advices
► Repairs of electrical appliances must be carried out by qualified personnel who are
trained by the manufacturer.
► Repairs performed by untrained persons may result in considerable hazards for the user
and damage the machine.
Attention
Please note
Attention
45