EBL -M7015 Guia Del Usuario página 7

TO AVOID PERSONAL INJURY AND PROPERTY
DAMAGE FROM, BUT NOT LIMITED TO, THE RISK
OF ELECTRIC SHOCK OR FIRE.
1. DO NOT disassemble and reassemble the charger, or it may
cause short-circuit.
2. DO NOT charge batteries whose cover are damaged, or it may
cause short circuit and fire hazard.
3. DO NOT charge non-rechargeable batteries. It might cause battery
leakage, battery explosion, personal injuries, etc.
4. DO NOT put anything on the charger while charging batteries, it
will accumulate heat to cause fire hazard.
5. Indoor use only, keep it away from direct sunlight and
moist/high-temperature environment.
6. Children should not use this charger without any adult's supervision.
7. Please use the power cable provided by EBL.
8. Place the batteries into the charger correctly by making sure the
+/- pole of battery matches the +/- pole of the charger.
9. The absolute 0 volt battery can not be charged in this charger.
10. EBL-M7015 is ONLY designed for 9V Li-ion and Ni-MH/Ni-CD
rechargeable batteries. Please DO NOT put any other types of
batteries in this charger, especially alkaline batteries.
11. New battery will reach the best performance after using 2-3 times.
12. Battery power will lose because of long time storage. Please
charge the battery fully if it is not used for long time.
13.
It's normal that the battery becomes hot while charging. The
temperature will cool down to normal later, please feel free to use it.
14.
Please note that Micro USB and Type C input ports can not be
simultaneously powered on.
WARNINGS
05