Kichler 65 Imari Manual De Instrucciones página 16

BUTTON INSTRUCTION
LED Indicator
Red LED: Transmitter signal indicator. When RF signal is sending, the red light will illuminate.
Green LED: To show the Forward and Reverse indicator.
ON/OFF Button
ON: Turn on the power.
OFF: Turn off the power.
Reverse Button
When the fan is running, press and release the Reverse button one time, the fan will change
operating direction.
Downflow: Green indicator LED will be off.
Reverse: Green indicator LED will be on.
Light Button
Press and release the Light button for light ON/OFF control. Light indicator LEDs will show
current light status. If the light kit is OFF, the Light indicator LEDs are also all off. Press AND
HOLD the light button for more than 1 second and the light kit will begin dimming. Light
indicator LED will show the change in light level status. The light level cycles from bright to
dim and back to bright when the light button is held.
Fig. 20
Fan Control
Press and release the Fan speed button for Fan ON/OFF control.
Fan indicator LED will illustrate the current fan speed. If the fan is OFF, the fan speed
indicator LEDs will also be OFF. Press and hold Fans speed button for more than 1 second to
begin adjusting the fan speeds. The indicator LEDs will show the current speed level. The fan
speed adjustments adjust in a repeat cycle when the speed button is held down. The speeds
adjust from High to Low, then back up to High.
16 | KICHLER.COM