Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRICAL CONNECTIONS
WARNING: Carefully read and retain this Instruction Manual
for future reference.
WARNING: To avoid possible electrical shock, be sure the
electricity is turned off at the main panel by removing the fuse
or opening the circuit breaker.
WARNING: This control is designed for use with "DC Motor
Ceiling Fans" ONLY. DO NOT use with any other type of
electrical appliance.
WARNING: All wiring must conform to national and local
electrical codes. If you feel you do not have enough electrical
knowledge, have a licensed electrician install the control.
WARNING: The amperage for your fan should not exceed 1A.
The total wattage for the lights 300W.
Make each of the wire connections illustrated in Figure 13.
Secure each with the wire nuts provided.
10 | KICHLER.COM
A. CEILING FAN TO RECEIVER WIRE CONNECTION
Step 1. Connect the Blue wire from the fan (motor) to the Blue
wire from the receiver. White wire from the fan (motor) to the
White wire from the receiver. Red wire from the fan (motor) to
the Red wire from the receiver. Gray wire from the fan (motor)
to the Gray wire from the receiver. (Fig. 13)
Step 2. If you do not plan to use the light kit with your fan at this
time, please DO NOT connect the Blue and White wires, and
respectively secure the blue and white wires with the wire nut.
B. RECEIVER TO HOUSEHOLD WIRE CONNECTION
Step 1. Snap together the 2-P wire connection plugs from the
receiver and filter: Black to black , White to white. (Fig. 13)
Step 2. Connect the Ground conductor of the 120V supply to
the one Green wire from filter and one from the fan.
C. WALL CONTROL WIRE CONNECTION
Step 1. Black wire (TO MOTOR L) from the Wall Control to the
Black wire from the Wall Outlet Box. (Fig. 13)
Step 2. Black wire (AC IN L) from the Wall Control to the Black
wire from the Wall Outlet Box.
Step 3. Your wall outlet box has a ground wire (green or bare
copper), connect the wall control's yellow/green ground wire
to it.
Publicidad
