Kichler 65 Imari Manual De Instrucciones página 8

HANGING THE FAN (continued)
Step 8. Slip the coupling cover, secure ring , canopy cover and canopy
Downrod
onto the downrod. (Fig. 9)
Canopy
Thread the hanger ball onto the downrod, insert the cross pin through
the downrod and tighten. Now tighten the set screw. (Fig. 9) Canopy Cover
Step 9. Lift the motor assembly into position and place the hanger ball
into the ceiling mounting bracket.
Coupling Cover
Set Screws
Rotate the entire assembly until the "Check Tab" has dropped into the
"Registration Slot" and seats firmly. (Fig. 10)
The entire motor assembly should not rotate (left or right) when seated
properly.
Retaining
Hitch Pin
Clip
WARNING: Failure to reattach the cross pin and seat the "Check Tab" can
cause the fan to fall from the ceiling during operation. Take special care to
make sure this pin is reattached.
Fig. 9
Registration
Slot
Fig. 10
8 | KICHLER.COM