Kichler 65 Imari Manual De Instrucciones página 13

ATTACHING THE FAN BLADES
CAUTION: To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing fan blades.
Step 1. Align the holes from the blade to the holes from the motor, and
secure the blade in place with screws and flat washers provided. (Fig. 15)
Step 2. Repeat this process to attach the other two blades.
INSTALLING THE LIGHT PLATE
Step 1. Loosen the two screws on the mounting ring attached to the
motor shaft and "remove" and save the third screw. (Fig. 16)
Step 2. Place the key hole slots on the light plate over the two screws
previously loosened on the mounting ring.
Turn the light plate until is locks in place at the narrow section of the key
hole slots.
Tighten both key hole screws and replace the third screw previously
removed and tighten securely.
Fig. 15
Mounting Ring
Light Plate
Screws
Fig. 16
Blades
Flat Washers
Screws
65" Imari | 13