Kichler 65 Imari Manual De Instrucciones página 14

INSTALLING THE LED LIGHT KIT
AND DECORATIVE RING
CAUTION: To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing light kit.
Step 1. Remove the two mounting screws on the inside of the LED light
kit. (Fig.17)
Wire Connectors
Light Plate
Step 2. While holding the LED light kit under the fan motor, make the wire
connections: (Fig. 17)
LED Light Kit
- White to white
Screws
Fig. 17
- Black to black
Step 3. Tuck the connections neatly into the light plate. Place the LED
light kit close to the light plate, secure by tightening the two screws.
(Fig.17)
Step 4. Position the notches in the decorative ring so they line up with
the tabs on the LED light kit. Carefully lift the decorative ring up inside
the light kit and secure it to the fan by turning the decorative ring
clockwise until snug. DO NOT OVERTIGHTEN. (Fig. 18)
Light Kit
Decorative Ring
Fig. 18
14 | KICHLER.COM