Rational B201 Manual De Instrucciones página 12

2 | MI_2062: Removal and Installation Thermocouple B201
Installing the thermocouple
a
The thermocouple is ready for use.
1. Connect the cable to the I/O board.
2. Pull the cable through the pan axis.
3. Screw the nut of the thermocouple onto the thread on the front of the pan.
>>
The thermocouple is installed.
Close the electrical compartment
1. Proceed in reverse order to the step Opening the electrical compartment .
2. Make sure that the console panel is pushed back onto the metal protrusion
at the bottom of the screw connection.
>>
The electrical compartment is closed.
Mounting the pan cover
1. Proceed in reverse order to the step Removing the pan cover.
Allocation is only necessary if several thermocouples have been exchanged.
Performing the allocation
a
The unit is connected to the mains.
a
The unit is switched on.
12 / 160
NOTICE
MI_2062_Removal_and_Installation_Thermocouple_B201_B211_S