Rational B201 Manual De Instrucciones página 4

1 | MI_2062: Removal and Installation Thermocouple B201/B211
Sharp edges on the housing
Risk of cuts on the housing when working in the electrical compartment.
Wear protective gloves.
The unit is falling from the installation surface
Risk of crushing and injury from tipping or turning of the unit.
Do not tip the unit onto the installation surface.
n
When turning the unit, make sure that the weight of the unit is evenly
n
distributed and that the unit is completely on the installation surface.
a
The unit is disconnected from the power.
1. Open the cover on the console panel and remove the 2 screws (1).
2. Remove the control panel. Place some protection on the pan lid to protect
the control panel against scratching and damage, e.g. a cardboard box or
bubble wrap (2).
>>
The control panel is open.
4 / 160
CAUTION
WARNING
1
MI_2062_Removal_and_Installation_Thermocouple_B201_B211_S
2