Rational B201 Manual De Instrucciones página 3

Modification Instruction
MI_2062: Removal and Installation Thermocouple B201/B211
iVario 2-XS /
iVario Pro 2-S
1 MI_2062: Removal and Installation Thermocouple B201/B211
General information
This section describes the retrofitting for unit sizes 2-XS and 2-S. The retrofit-
ting for unit sizes L and XL can be found in the next section.
The illustrations in this manual are examples only and may differ from the unit.
The following steps apply to the left and right pans.
Required component
Thermocouple B201 (left pan)
Thermocouple B211 (right pan)
Removing the pan cover
a
The unit is switched on.
1. Raise the pan electrically.
2. Turn off the unit.
3. Switch off the power supply to the unit.
4. Remove the 5 screws on the bottom of the pan cover (1).
5. Remove the pan cover (2).
>>
The pan cover has been removed.
Opening the control panel
High voltages when connecting to the mains power
Danger to life due to high voltage.
Disconnect from the power supply.
n
Make sure the unit is disconnected from the power.
n
30 min.
Component:
Standard
Article number:
40.06.857S
40.06.858S
1
DANGER
62 / 2020
30.11.2020
2
3 / 160