Emos SELECT ESW9010 Guia Del Usuario página 14

4. Jot down your ID and key for the further setup step.
SETUP WI-FI CONNECTION
1. When you power up the console for the fi rst time, the console LCD will show fl ashing "AP"
and " " icon to signify that it has entered AP (Access Point) mode, and is ready for WI-FI
settings. User can also press and hold the [ SENSOR / WI-FI ] key for 6 seconds to enter
AP mode manually.
2. Use the smart phone, tablet, or computer to connect the console through WI-FI.
3. In PC / Mac choose WiFi network settings or In Android / iOS choose setting
the console's SSID: PWS-XXXXXX in the list and it will need several second to connect.
PWS-XXXXXX
PC (Windows 10) WI-FI network interface
4. Once connected, enter the following IP address into your internet browser's address bar, to
access the console's web interface:
NOTE :
- Some browsers will treat 192.168.1.1 as a search, so make sure you include http:// header.
- Recommended browsers, such as the latest version of Chrome, Safari, Edge, Firefox or
Opera.
- WI-FI network interface of PC / Mac or mobile subject to change.
Android WI-FI network interface
http://192.168.1.1
14
PWS-XXXXXX
WI-FI to select