Emos SELECT ESW9010 Guia Del Usuario página 19

NOTE:
- In normal mode, press [ CLOCK SET ] key to switch between year and date display.
- During the setting, you can press and hold [ CLOCK SET ] key for 2 seconds to back to
normal model.
DAYLIGHT SAVING TIME (DST)
DST function is set to "AUTO" by default (for EU or US version). If the current date on display is
with in the summer daylight saving period, the time will be automatically adjusted forward by +1
hour, and DST icon will be shown on the LCD display.
MOON PHASE
The moon phase is determined by the
time, date and time zone. The following
table explains the moon phase icons of
the Northern and Southern Hemispheres.
Please refer to POINTING THE
WIRELESS 7-IN-1 SENSOR TO SOUTH
section about how to setup for the
Southern Hemispheres.
SUNRISE & SUNSET TIME
The console indicates your location's sunrise & sunset time
by the time zone, latitude and longitude you entered. Please
enter the correct information in the regarding settings. If the
latitude and longitude values do not match the time zone,
the sunrise & sunset time cannot be shown.
SETTING ALARM TIME
1. In normal time mode, press and hold [ ALARM ] key for 2 seconds until the alarm hour digit
flashes to enter alarm time setting mode.
2. Press [ ] or [
3. Press [ ALARM ] key again to step the setting value to Minute with the Minute digit flashing.
4. Press [ ] or [
5. Press [ ALARM ] key to save and exit the setting.
NOTE:
- In alarm mode, the "
- The alarm function will turn on automatically once you set the alarm time.
] key to change the value. Press and hold the key for quick-adjust.
] key to adjust the value of the flashing digit.
" icon will display on the LCD.
Northern
Moon Phase
Hemisphere
New Moon
Waxing Crescent
First quarter
Waxing Gibbous
Waning Gibbous
Third quarter
19
Southern
Hemisphere
Full Moon
Waning
Crescent