Keysight U1273A Manual De Instrucciones página 116

3 Multimeter Features
Performing manual logs (HAND)
Ensure that HAND is selected as the data logging option in the multimeter's
setup.
1 Press
display will return to normal after a short while (around 1 s).
Figure 3-7
2 Repeat
The maximum number of readings that can be stored for the manual log is 100
entries. When all entries are occupied, H : FULL will be shown when
pressed.
See the
review or erase the recorded entries.
Performing interval logs (AUTO)
Ensure that AUTO is selected as the data logging option in the multimeter's setup.
The default recording interval duration is 1 second. To change the recording
interval duration, see
more information.
The duration set in the multimeter's setup will determine how long each recording
interval takes. The input signal value at the end of each interval will be recorded
and saved into the multimeter's memory.
116
for more than 1 second to store the present input signal value.
and the log entry number are displayed at the right of the display. The
Manual log display
step 1 again to save the next input signal value.
Reviewing Previously Recorded Data (View)
"Changing the sample interval duration"
section later in this manual to
Keysight U1273A/U1273AX User's Guide
is
on page 133 for