Publicidad
Idiomas disponibles
Idiomas disponibles
3 Press
Sanitizing the Log Memories
You have the option to sanitize the log memories of your multimeter. This
operation erases the log memories of your multimeter thoroughly. The data stored
in the multimeter's memory will not be able to be reconstructed in any way after
the data sanitization operation.
Prior to sanitizing the log memories, ensure that all manual (H), interval (A), or
event (E) entries have been cleared (see
When all entries are cleared (H : Void, A : Void, and E : Void), press and hold
for more than 1 second.
The data sanitization operation may take up to 30 seconds to complete. Do
CAUTION
not press any keys or turn the rotary switch until the data sanitization
operation is completed.
Keysight U1273A/U1273AX User's Guide
4 Press
to view the previous stored entry. The index number decreases by
Setup
one.
5 Press
for more than 1 second to clear all entries for the selected log
type.
for more than 1 second to exit the View mode.
Multimeter Features
step
5).
3
121
Publicidad
