Keysight U1273A Manual De Instrucciones página 117

Start the interval log mode
1 Press
Subsequent readings are automatically recorded into the multimeter's memory at
the interval specified in the setup menu.
Figure 3-8
2 Press
The maximum number of readings that can be stored for the interval log is 10000
entries. When all entries are occupied, A : FULL will be shown when
pressed.
The interval and event log share the same memory buffer. Increased usage of the
interval log entries will lead to the decrease of the maximum entries for the event
log, and vice versa.
See the
review or erase the recorded entries.
When the interval log recording session is running, all other keypad operations
NOTE
are disabled; except for
stop and exit the recording session. Furthermore, APO (auto power-off) is
disabled during the recording session.
Keysight U1273A/U1273AX User's Guide
for more than 1 second to start interval log mode.
and the log entry number are displayed at the right of the display.
Interval log display
for more than 1 second to exit the interval log mode.
Reviewing Previously Recorded Data (View)
, which, when pressed for more than 1 second, will
Multimeter Features
section later in this manual to
3
is
117