Publicidad
Idiomas disponibles
Idiomas disponibles
Starting to Spray
Move the shutter lever stopper and
align it with necessary opening.
１．
１．
１．
１．
Shoulder the machine
２．
２．
２．
２．
on your back.
Operate the throttle lever
and align it with the
３．
３．
３．
３．
discharge nozzle.
The lever is operated by
pushing lightly to wards
the outside.
Raise the shutter
lever
to
begin
４．
４．
４．
４．
spraying.
Begin
spraying by pulling
the shutter lever
lightly to the inside.
Wear vinyl gloves before starting cleaning.
Remove the chemical tank.
１．
１．
１．
１．
Take out the R-pin and pull out the
intermediate rod.
Open the tank shutter, remove the
chemicals in the tank, and clean the tank.
２．
２．
２．
２．
Turn look lever and remove the tank.
Push down the shutter-lever to the lowest
stage and stop spraying.
１．
１．
１．
１．
Move the throttle to
the
２．
２．
２．
２．
keeping the shutter
closed
stop the engine.
Set the toggle switch to "STOP".
３．
３．
３．
３．
Toggle switch
After spraying
3． ． ． ．
Install the chemical tank.
Tightening
alternately to hold both sides
(Lower than horizontal).
When fertilizer is sprayed, the shutter may become
stuck or metal parts may corrode, therefore, careful
cleaning is required.
If the removed chemical tank is placed on the floor, place
it with the cover facing down.
4.
Cleaning info the chemical
tank.
20
Stop
lowest
stage
and
then
shall
be
made
Publicidad
