Maruyama MD7026 Manual Del Usuario página 24

・If you find a bad condition during the starting inspection or operation, immediately perform the proper
maintenance.
Please contact to the shop where you purchased this machine.
・Subjects to be informed:
○Name of machine type
○Manufacturing No.
○Details of the failure
Please explain in detail about what part experienced the problem, what caused the problem, and what
action was taken.
・To use the machine safely, correct operation and periodical maintenance are indispensable. Please ask
the dealer where you purchased the product to inspect and maintain it at least once a year. Routine
maintenance is not covered by warranty.
List of Specifications ●These specifications may be changed without prior notice.
Dimension (Length x width x Height) (mm)
Standard equipped weight (Kg)
Chemical tank capacity (L)
Fuel tank capacity (L)
Fan Type
Engine RPM
Discharge volume
Model
Engine type
Displacement
Fuel mixture ratio
Carburetor
Ignition system
Spark plug
Staring system
8． ． ． ． After Service
9． ． ． ． Specification
790×535×400
Powder
Fertilizer
23
MD7026
12.1
26
2.0
Turbo fan
7,600
8kg/min
20kg/min
CER600
Air-cooled 2-stroke
60.9cc
50(gasoline):1(oil)
All position diaphragm
Electric
NGK BPM8Y
Recoil starter
MD9030
820×560×405
12.9
30
6,950
CER800
79.2cc