Beta 680/3 Manual De Uso E Instrucciones página 15

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
- to select a parameter
- to confirm the selected parameter
- to select the setting
- to confirm the selected setting
Settings options
Parameter
Sensitivity
Reset
Hold time
- to exit and save the input settings:
- select and press
- to go back to the measurement screen without saving the input settings, press
Target Button
- Press to select the desired parameters
- Hold to enter TARGET MENU:
- to select a parameter
- to confirm the selected parameter
- to select the setting
- to confirm the selected setting
Settings options
Parameter
# 01 - 15
Unit of measurement N·m / lbf·ft / etc...
Value Range depends on model
±% 1-15%
- To exit and save the input settings:
- select e and press
- to go back to the measurement screen without saving the input settings, press
Possible settings
Low / Medium / High
Auto / Manual
1 / 2 / 3 sec
to confirm
Possible settings
to confirm
Notes
When the unit of measurement is changed, the value
will change accordingly.
Press and hold the selection buttons to scroll the
values more quickly.Setting the target value to '0' will
disable it, and it cannot be selected in the measure-
ment screen.
EN I
15