Ohyama WOOZOO PC-MA3 Manual De Instrucciones página 20

K
How to use
• When cooking starts, pressure cooking
lamp will blink. When steam is generated
at pressures, the lamp will light up.
(during the temperature rise)
Indicator on
(pressuring)
(pressure decreasing)
• When pressured, the float valve will come
out from the surface of the lid.
• Once pressure is being applied, then steam
will come out of the anti-block. When the
pressure release knob on the weight goes
over to the sealed side （
will be adjusted due to the effect of the
weight, and the amount of steam can be
controlled.
• When opening the lid during cooking,
press keep warm/cancel button and open
the lid after the float valve drops all the
way down.
• Pressing keep warm/cancel button during
cooking will turn off pressure cooking
indicator lamp. Before opening the lid,
make sure that the float valve drops all
the way down.
• To remove the pressure forcibly, turn the
pressure release knob on the weight to the air
exhausting side (P5）to let out the steam .
● When letting out steam before
the pressure has been reduced
completely, refer to page 5 how
to open the lid when cooking and
open the lid in accordance with
Caution
those instructions.
Do not try to force the lid open,
or the food inside may burst out,
and it may cause burns.
After cooking is finished
After the cooking cycle has completed, the
cooker will beep.
• Once cooking is finished, it will make a
sound to remind.
※ After 12 hours, the keep warm function
will turn off.
Preset menu (stew, roast, bean, soup) continued
Blinking
Blinking
） , the pressure
■ If you want to turn off the
keep warm function
After the cooking cycle has completed,
press the keep warm/cancel button.
• The keep warm indicator lamp will go out,
and the settings will return to the previous
mode.
Turn off
• To keep warm again, press the keep
warm/cancel button.
The keep warm indicator lamp will come
on, and it will start keeping warm.
■ If you want to cancel an
operation that is in progress
Press the keep warm/cancel button.
• The operation will be cancelled, and the
settings will return to the previous mode.
■ After use
After you have finished using, unplug the
power cord and clean the main unit once it
has cooled.
20
PC-MA3