Ohyama WOOZOO PC-MA3 Manual De Instrucciones página 37

K
Weight, anti-block
Use a toothpick to remove any sediment or
anything else that has gotten stuck inside the
valve.
Anti-block cap
Remove, wash with a neutral cleaning agent
that is for kitchen use, and rinse off with water.
※ After washing and drying off thoroughly,
do not forget to set up in place.
※ When setting up into place, make sure
that there is no gap or crack between the
cap and the lid, and that the cap is not
askew; it will make a clicking sound when
it is finally in place.
Float valve
Gap
37
Take out, and use a toothpick to remove any
sediment or anything else that has gotten
stuck inside.
• To clean and maintain the float valve, first
remove the float valve cap from the inside
of the lid, then pull the pin out from the lid.
• Also, remove any sediment or anything
else that has gotten stuck inside the hole
from which the float valve was removed.
※ After cleaning and maintenance, do not
forget to set up in place.
PC-MA3