Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
2
Safety information
2.1
Intended use
en
3
Product description
3.1
Operating and status indicators
4
Mounting
20
O P E R A T I N G I N S T R U C T I O N S | WTF9-3
Connection, mounting and configuration of the product must only be car‐
ried out by qualified personnel.
This product does not constitute a safety component as defined in the
NO
Machinery Directive.
2006/42/EC
SAFETY
Do not install the product in places exposed to direct UV radiation (sun‐
light) or other weather conditions.
The product must be adequately protected against moisture and contami‐
nation.
The WTF9-3 is an opto-electronic photoelectric proximity sensor (referred to as "sensor"
or "product" in the following) for the optical, non-contact detection of objects, animals,
and persons. If the product is used for any other purpose or modified in any way, any
warranty claim against SICK AG shall become void.
The WTF9-3 is particularly suited to the detection of flat, glossy, contrast-rich, and
uneven objects in front of a background.
Table 1: Operating elements and status indicators
WTF9-3xxxx1
Potentiometer: adjusting the sensing range
4
5
9
Figure 1: Potentiometer
Yellow LED: status of received light
4
beam
Green LED: supply voltage active
5
Potentiometer: adjusting the sensing
6
range
Mount the sensor using a suitable mounting bracket (see the SICK range of accesso‐
ries).
WTF9-3xxxx2
Teach-in button: Adjusting the sensing range
3
4
8
Figure 2: Teach-in button
Yellow LED: status of received light
3
beam
Green LED: supply voltage active
4
Teach-in button: Adjusting the sensing
8
range
8028048/2022-09-05 | SICK
Subject to change without notice
Publicidad
