HOW TO OPERATE THE CASSETTE CONVECTOR FAN
The convector fan is operated by means of a control panel fixed to the wall. Three versions are available,
commutator, basic thermostat, advanced thermostat.
1: How to turn the appliance on/off:
· Switch the position of the top selector. A led will come on to indicate that the
convector fan is operating (with the exception of versions CMR-F).
2: Temperature control:
· Use the knob to select the correct temperature (with the exception of
versions CMR-F). The temperature corresponding to the central position of
the knob (pos. 0) is:
- Winter rate: 20°C
- Summer rate: 25°C
3: Ventilation control:
· Turn the selector to one of the three available speeds in order to obtain the
desired performances.
4: Seasonal mode:
· Turn the selector as illustrated below:
-
: To operate in the heating mode.
-
: To operate in the cooling mode
- AUTO: in this mode, the convector fan is able to "understand" the operating
mode required (with the exception of versions CMR-F).
5: Economy key (only versions TER-F): This function allows the winter and
summer set-points to be changed.
· Press the economy button. A led will indicate that the function has been
activated, thus:
· The fan will operate at minimum speed
· The temperature corresponding to the central position of the knob (pos.0) is:
- Winter rate: 17°C
- Summer rate: 28°C
NOTE: Set the thermostat controlled controls (basic and advanced
thermostat) on the valve. See instructions supplied with the controls!
48
ROUTINE MAINTENANCE
COMMUTATOR
BASIC THERMOSTAT
ADVANCED THERMOSTAT