Keysight U1271A Guia Del Usuario página 117

Select the data logging option
1 Press
2 Press
3 Press
Performing manual logs (HAnd)
Ensure that
1 Press
Figure 3-6
2 Repeat
The maximum number of readings that can be stored for the manual log is
100 entries. When all entries are occupied,
pressed.
Keysight U1271A/U1272A User's Guide
for more than 1 second to enter the multimeter's Setup mode.
Setup
until
to change the data logging option.
Available options:
to save the changes. Press and hold
restarts.
is selected as the data logging option in the multimeter's Setup.
for more than 1 second to store the present input signal value.
and the log entry number are displayed at the top of the display. The
display will return to normal after a short while (around 1 s).
Manual log display
step 1 again to save the next input signal value.
is shown on the secondary display. Press
, , or .
Multimeter Features
Setup
until the multimeter
Setup
will be shown when
3
or
Dual
E xit
is
117