Keysight U1271A Guia Del Usuario página 142

4 Multimeter Setup Options
Changing the thermocouple type (U1272A only)
This setting is used with temperature measurements (see
thermocouple type that matches the thermocouple sensor you are using for
temperature measurements.
Parameter
CoUPLE
To change the thermocouple type:
1 Press
2 Press
Figure 4-12
3 Press
4 Press
5 Press and hold
142
Range
tYPE K or tYPE J
for more than 1 second to enter the multimeter's setup menu.
Setup
or until
CoUPLE display
or to change the thermocouple type.
Dual
E xit
Setup
to save your changes or press
until the multimeter restarts to return to normal operation.
Setup
page
is shown on the secondary display.
to discard your changes.
Keysight U1271A/U1272A User's Guide
88). Select a
Defaul t setting
tYPE K