Keysight U1271A Guia Del Usuario página 70

2 Making Measurements
Using Qik-V for Voltage Measurements (U1271A only)
Use the Qik-V function to help you check for the presence of either or both AC and
DC voltages before you set a precise range for a more accurate reading.
1 To quickly identify the measured signal type, rotate the multimeter's rotary
2 Probe the test points and read the display. The AC voltage measurement is
Figure 2-12
Once the signal type is identified (AC, DC, or AC+DC voltage), select the
appropriate voltage measurement function by turning the rotary switch to an
appropriate position and function (AC, DC, or AC+DC) for a more accurate
reading.
70
switch to .
Qik-V
shown in the primary display and the DC voltage measurement is shown in the
secondary display. Press
on the primary and secondary displays.
Qik-V display
to exchange the ACAC and DC voltage indication
Dual
E xit
Keysight U1271A/U1272A User's Guide