Publicidad
Idiomas disponibles
Idiomas disponibles
Changing the user scale conversion value and unit
You can set the user scale conversion value and unit. The ratio can be set from
0000.1 to 1000.0 and the unit can be set to V/V, A/V, or 000 (no unit)/V. The
default is 1000 V/V. See
information on the Scale operation.
Parameter
Scale USEr
To set the user scale conversion value and unit:
1 Press
2 Press
Figure 4-19
3 Press
4 Press
5 Press and hold
Keysight U1271A/U1272A User's Guide
Range
(0000.1 to 1000.0) V/V, A/V, or 000 (no unit)/V
for more than 1 second to enter the multimeter's setup menu.
Setup
or
SMootH display
or
to set the scale conversion value. Move the cursor to the unit
Dual
E xit
Setup
indicator (right-most) to change the scale conversion unit.
to save your changes or press
until the multimeter restarts to return to normal operation.
Setup
"Making Scale Transfers (Scale)"
until
is shown on the secondary display.
Multimeter Setup Options
on page 110 for more
Defaul t setting
(1000.0) V/V
to discard your changes.
4
149
Publicidad
