Ivoclar Vivadent Bluephase PowerCure Instrucciones De Uso página 9

3 Application
3.1 Start-Up
Check the delivery for completeness and any possible transportation damage (see List of Parts).
If parts are damaged or missing, contact your Ivoclar representative.
Charging base
Before you switch on the device, make sure that the voltage mentioned on
the rating plate complies with your local power supply.
Slide the connection plug of the power pack into the socket on the under-
side of the charging base. Tilt it slightly and apply slight pressure until you
hear and feel it snap into place. Place the charging base on a suitable, flat
table top.
Connect the power cord with the power supply and the power pack. Make
sure that the power cord is easily accessible at all times and and can easily
be disconnected from the power supply. The charging base will briefly
display "Bluephase PowerCure" as ticker text on the screen.
Handpiece
Unpack the handpiece from the packaging and detach the light guide by
pulling it out. Then clean the handpiece and light guide (see Maintenance
and Cleaning). After cleaning, reinsert the light guide.
For reasons of hygiene, we recommend using a disposable protective sleeve
for each patient (see Maintenance and Cleaning). Make sure to fit the
protective sleeve snugly to the light guide. Sleeves enclosed in the delivery
form may be used or sleeves can be purchased per country specific
regulations. Then, attach the anti-glare cone or anti-glare shield to the
light guide.
9