Bosch Rexroth 3842 559 921 Manual De Instrucciones página 51

be reduced
** = 2 controls synchronized via distributors
Travel time
• At full load, the lifting modules can be moved for a maximum of 2 min. in a
row (with three lifting modules max. 1 min). Afterwards, a cooling time of up
to 18 min. is necessary (after 1 min. operation approx. 9 min.). The control
unit monitors the temperature and switches off with an error message, if
necessary, see section 12 "Troubleshooting". After a cooling time of at least
one minute, movement is possible again with restrictions.
• The control monitors the converted energy. With partial load, correspondingly
longer movement is thus possible. At 50% of the load, the time period is
about doubled; at 30%, it is tripled. Tilting moments have a reducing effect.
6 Transport and storage

Protect the product from mechanical stress, dirt and humidity.

See also section 17.1 "Ambient conditions".
7 Installation
Live components
Risk of death due to electric shock.

Protect all electronic devices from contact with liquids.

Protect connection lines from squeezing, bending and tensile load.

When installing the connection lines, secure them tightly and protect them
from mechanical loads.

In case of malfunctions, pull out the mains plug
7.1 Installation requirements

See also section 17 "Technical data".
WARNING
3 842 564 712/2022-06, MPS: Steuergerät, Bosch Rexroth AG
Transport and storage 15/36