Publicidad
Idiomas disponibles
Idiomas disponibles
1
In the "Field setting menu" screen, press
[
] and [
then press [
Test mode is set, and returns to the "Field
setting menu" screen. Press the [
button 2 times, to open screen (2).
2
Press [
ON/OFF]
Operation starts, and in test mode screen (1)
opens. (While stopped, it is screen (2))
Test mode is done while the operating mode is
set to "Cool" or "Heat".
The temperature cannot be set in test mode.
Check codes are displayed in the normal way.
3
After completing test mode, in the "Field
setting menu" screen, press [
[
] to select "Test mode", and then press
[
Set/Fix]
Screen (3) appears.
Press [
Set/Fix] to end test mode and do
normal operation.
– 34 –
Installation Manual
] to select "Test mode", and
Set/Fix]
Return]
] and
EN
34-EN
Publicidad
