Breville the Barista Touch Impress Manual De Instrucciones página 14

SETTING THE GRIND SIZE AND
DOSING
• Adjust the grind size by using the dial on the
side of the machine.
• Follow the screen prompts to select the
preferred 'Basket Size'.
• Tap on the portafilter image to start the
grinding and allow fresh ground coffee to fill
the portafilter.
• Grinding will automatically stop.
INTELLIGENT BREW SETUP
Intelligent Brew Setup is a feature that helps
achieve a good coffee extraction range by
assisting the dial-in process of the grinder.
When successfully completed, you can enjoy
a balanced coffee shot.
From this point, further adjust grind size and
experiment to suit your style.
It is recommended using this feature whenever
you change beans, or the too fast or too slow
notifications are shown on screen.
Find the Intelligent Brew Setup in the Settings
menu under Drinks Settings.
14
MANUAL GRIND PURGE
For best coffee results, if the machine has not
been used for a while it is recommended to
purge any stale beans that have been ground
and left in the grinder chute.
To purge; tap and hold the grind button for
2 seconds, and run for around 5 seconds.
To stop; press the stop button. Grind purge
will stop automatically after 30 seconds if stop
button is not pressed.
ASSISTED TAMPING
• When grind cycle is completed, the machine
is ready to tamp.
Push the lever downwards to the end position.
This will tamp the coffee grinds in the
portafilter using a consistent amount of tamp
force. Pushing the lever slowly and consistently
will help to improve the puck appearance.
• Release the lever slowly upwards to the home
position after tamping.
• Repeat the tamping action as above twice.