Publicidad
Idiomas disponibles
Idiomas disponibles
1
Fig. 9
max. 1 Nm
Fig. 10
2
3
Assembling the
charging system
4
5
click!
After performing the required installation steps, fit the
frame with the cover.
Proceed as follows:
•
Peel the protective film off the cover, as shown in
Fig. 9.
•
Please note that the cover is fitted with its unlabelled
side facing the inner side of the frame. Listen for the
click indicating that it has snapped into place.
•
Fasten the outer frame on the charging system using
the supplied screws at the positions shown in Fig. 10.
Instructions for removing the cover are available in the
Download area at www.amperfied.com.
6
7
English
33
Publicidad
