essentiel b ERLV185-60miv1 Instrucciones De Uso página 20

• The appliance must be installed in such a way that the power point is accessible.
• After installing it, make sure that it is not resting on its power cord.
•
in the upright position, or 24 hours if the
appliance was transported in the horizontal
position. This is to allow the refrigerant gas
to go back down into the compressor.
Failure to comply with this waiting period
may damage the compressor.
Climate class
Only install the appliance in a location where the room temperature matches the
climate class for which it was designed (see table below).
The climate class is on the rating plate located on the outside of the appliance.
The table below shows the correct room temperature for each climate class:
Your ERLV185-60miv1 fridge is rated "SN/N/ST/T". If the room temperature is below
or above the rated room temperature, the performance of your fridge may be affected,
and your food may spoil.
Sufficient ventilation
Make sure that air can circulate freely around the appliance to ensure that it can work
properly (see figure below).
The space above the refrigerator should be more than 30 cm, and the
20
Before plugging the appliance
into the mains socket for the
first time, please let the
appliance rest for two hours if
the appliance was transported
Climate class
SN
N
ST
T
Room temperature
+10 to +32°C
+16 to +32°C
+16 to +38°C
+16 to +43°C