essentiel b ERLV185-60miv1 Instrucciones De Uso página 25

When you plug in the refrigerator, all indicator lights flash for 3 seconds. For the first
connection, the default temperature is set to 4°C. Thereafter, each time you restart the
refrigerator, it will operate according to the temperature set before the last power off.
1. Temperature control key
The following temperatures are available:
• 8°C, 6°C, 4°C, 3°C & 2 °C
We recommend setting the temperature to 4°C when starting up your appliance.
2. Super Cooling mode
This mode is used to quickly refrigerate a large quantity of food (when returning
from shopping for example). Remember to activate this mode 1 or 2 hours before
introducing fresh food.
This mode makes it possible to quickly reach the temperature of 2°C. The unit will
exit this mode automatically after working for 360 minutes or if you change the
temperature setting or mode setting.
3. Put the appliance on standby
To switch it on again, briefly press the button.
If you want to switch off your appliance for a prolonged period, unplug it from the mains
power.
4. Alarm
• Fault alarm
Press the temperature control key repeatedly to reach your
desired temperature. The selected temperature will light up. The
temperature change will take effect 15 seconds after the setting
is selected.
Press the SETTING button 6 times until the SUPER COOL mode
indicator light comes on.
If you want to put the appliance on standby, press and hold this
button for 10 seconds. The control panel switches off and the
refrigeration system stops. Be careful not to leave any food
inside the appliance.
If your appliance detects an anomaly during operation, an audible
alarm sounds. Briefly press the DOOR ALARM button to stop the
alarm. If this occurs again, contact the after-sales service to get
someone to check your appliance.
25