Publicidad
Idiomas disponibles
Idiomas disponibles
2. Safety / 3. Specifications
2.2 Personnel qualification
GB
Skilled personnel
Skilled personnel are understood to be personnel who, based on their
technical training, knowledge of measurement and control technology
and on their experience and knowledge of country-specific regulations,
current standards and directives, are capable of carrying out the work
described and independently recognising potential hazards.
Explanation of symbols
3. Specifications
Accuracy
At 1,000 and 2,000 Pa: ±5 Pa + ±1.5 % of the display
At 5,000 and 7,000 Pa: ±7 Pa + ±1.5 % of the display
Scale ranges
0 ... 1,000, 0 ... 2,000, 0 ... 5,000 or 0 ... 7,000 Pa
Selectable units on the display: m³/s, m³/h, cfm, l/s, scfh, lpm, mbar,
mmWC, inchWC, kPa or Pa
6
WARNING!
Risk of injury if qualification is insufficient!
Improper handling can result in considerable injury and
damage to equipment.
The activities described in these operating instructions
■
may only be carried out by skilled personnel who have
the qualifications described below.
CE, Communauté Européenne
Instruments bearing this mark comply with the relevant
European directives.
WIKA operating instructions air2guide model A2G-25
Publicidad
