Publicidad
Idiomas disponibles
Idiomas disponibles
Approvals
CE Conformity
90/384/EU – Non-automatic Balances and Scales
EN45501: 1992 – Adopted European Standard
89/336/EU – EMC Directive
EN55022, 1998, Class A
Weights and Measures (US) Class III or IIIL devices NTEP
Certificate of Conformance No. (pending)
Weights and Measures (Canada) 10,000 division rating and
approval (pending)
Weights and Measures (Australia) Class III non-automatic
weighing instruments as defined in the National Standards
Commission, Document R76
Conforms to OIML R76
Conforms to IP69K
Controller PCB
The IND310drive terminal's controller printed circuit board (PCB) supports scale
function interface boards, including single analog, dual analog, POWERCELL, or
single analog and POWERCELL interfaces. Supply voltage for the POWERCELL is
either 12 or 24 volts.
Communication ports (COM1 and COM2) are RS 232/20 mA CL and RS 485/422
compatible. Both serial ports are available simultaneously for transmitting;
however, only one can receive data at any given time. A PS/2 and an ethernet port
are also available. Connections to the controller PCB are made using removable
terminal strips with wire sizes ranging from 24 to 16 AWG.
Display and Keyboard
The IND310drive terminal has an LCD display (see Figure 1-5) that shows the
terminal's status, including the active scale, date, and time across the top, the
current application in the middle, and enabled softkey functions across the bottom.
IND310drive Installation Manual
IND310
1-7
Publicidad
