Publicidad
Idiomas disponibles
Idiomas disponibles
IND310drive Installation Manual
Ethernet
The ethernet connection is used for FTP download. See Figure 2-10 for the location of
the RJ45 ethernet connector. See the IND310drive User Manual for application details.
External Keyboard
A standard computer keyboard can be connected to the terminal via the PS/2 port
located on the main board. See Figure 2-10 for the location of the connector.
Power-up Sequence
The power-up sequence takes approximately 90 seconds. The unit will beep when
For application-
plugging it in and then it will display the METTLER TOLEDO logo. The display will be
specific functions,
followed by another beep, a truck display, and a status message that shows the
see the User
progress of the initialization process at the bottom of the screen. The software version
Manual.
number displays during the initialization process.
PCB Jumpers and Connectors
All internal jumpers have been factory set.
For additional
information on PCB
jumpers, see the
Technical Manual.
2-8
Table 2-4: Com 2 (Port on Main Board)
J11 Pin
IND310drive Signal
Number
Description J11
1
TxD2 (RS 232C)
2
RxD2 (RS 232C)
3
GND
4
TXD+ (RS 485/422)
5
TXD– (RS 485/422)
6
RXD+ (RS 485/422)
7
RXD– (RS 485/422)
Publicidad
