Zodiac Z350iQ Manual De Instalación Y De Uso página 21

2.4.4 Using and selecting the different active operating modes
In "Heating" mode, the heat pump has 3 active operating modes for adjusting its operating speed to the power that is
required and the mode that is selected.
Depending on the selected operating mode ("BOOST", "SMART" or "SILENCE"), the power delivered by the heat pump
can vary over a predefined range (depending on the speed of its compressor and fan).
The number of lit LEDs on the strip reflects the compressor's actual operating speed. This feature is particularly useful in
the "SMART" and "SILENCE" modes to see if the machine is operating at its maximum over the predefined power range
or, on the contrary, at a reduced power level.
Status
Quickly increasing the setpoint
Objective
temperature
When to use When commissioning the pool
* The compressor speed directly affects the appliance's power output.
To select the active operating mode:
• From the main screen (where the measured water temperature is displayed), press
front of one of the 3 operating modes ("BOOST", "SMART" or "SILENCE").
Press until reaching the desired mode. Once the indicator
is confirmed automatically.
2.4.5 Switching the LED strip on/off
The front LED strip is lit by default. To switch it off:
• From the main screen (where the measured water temperature is displayed), press and hold
«COOL» is displayed on the screen.
• Press and release. «LED» is displayed on the screen.
• Press and release. «ON» is displayed on the screen.
• Press and release: «ON» flashes.
• Press and release: «OFF» flashes.
• Press and release. The LED strip is switched off and the LEDs will remain unlit.
Active operating mode
BOOST
Intelligently controlling the
To avoid having to intervene on
SMART
Heating
operating speed
Automatically adapting the power to requirements
To maintain the temperature
To benefit from quiet operation
the appliance when little heating is required
is placed in front of the desired operating mode, it
SILENCE
Operating the most
economically and quietly
. The indicator stops in
.
EN
19