Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1.
Housing
2. Control panel
3. Handle
4. Door
5. Ventilation grid
6. Rotisserie accessory
7.
Baking tray
8. Oven rack
9. Air fry tray
10. Fat-drip tray
11. Rotisserie
12. Tray removal accessory
13. Pizza stone
Control panel
Fig. 2.
14. On/off
15. Pre-set functions
16. Preheating
17. Rotisserie
18. Fan
19. Temperature/time setting
20. Light
21. Start/Pause
22. Temperature or time decrease
23. Temperature indicator
24. Time indicator
25. Temperature or time increase
2. BEFORE USE
-
This product includes a packaging designed to protect it during transport. Unpack the
appliance and keep the original packaging box and other packaging materials in a safe
place. It will help prevent any damage if the product needs to be transported in the future.
In case the original packaging is disposed of, make sure all packaging materials are
recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the Technical Support Service
of Cecotec.
46
BAKE&FRY 3000 STEEL TOUCH
-
Clean the tray and other accessories thoroughly with hot water, detergent and a
non-abrasive sponge.
-
Keep a distance of at least 110 mm between the power socket and the wall, furniture, etc.
-
Clean the interior and the exterior of the oven with a damp cloth and dry it afterwards.
-
Place the oven on a stable and flat surface.
Warning:
-
Do not wet the interior heating element.
-
Do not place the oven on any surface that it is not heat-resistant.
Features:
-
The device features an open door sensor. This means that, when you open the door, the
cooking process will pause and the light turns on. The word 'Open' will appear on the
display. When you close the door, the cooking process will resume
Note:
You may notice a slight burning smell or smoke when using the product for the first time,
caused by the excess of lubricants from the manufacturing process. This will not affect the
product safety.
3. OPERATION
The hot-air frying oven features 9 pre-set programmes, fan function, rotisserie function and
preheating. Next, you will find a quick operation guide for the device operation and all the
buttons on the control panel.
Quick operation guide
1.
Plug the device to the mains supply and on a flat and stable surface. Avoid placing the
device near walls, so the ventilation is better.
2.
Press the ON/OFF icon (14) and the control panel will automatically light up and the time
and temperature indicators will show '- - -'.
3.
Select one of the 9 pre-set functions. If the pre-set configuration does not suit you,
you can modify the time and temperature. Moreover, you can add the fan or rotisserie
functions to the cooking process.
4.
If you wish to preheat the device, press the icon 16 and the device will automatically start
the preheating; once it is finished it will emit a sound and it will start the selected cooking
function. If you do not wish to preheat the device, press the Start/Pause icon (21) after
selecting the function.
5.
When the cooking process finishes, the device will emit a sound to inform you.
6.
Press the ON/OFF icon (14) to finish the cooking.
Warning
The device will enter the standby mode after approximately a minute of inactivity. To start the
device again, press the ON/OFF icon (14).
ENGLISH
BAKE&FRY 3000 STEEL TOUCH
47
Publicidad
