Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1.
Control panel
2.
Air vent
3.
Fan base
Cord
4.
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If any of them
are missing or not in good condition, please contact Cecotec's official Technical Support
Service immediately.
Box contents
-
EnergySilence 8050 Skyline Smart fan
-
Remote control
-
Instruction manual
3. PRODUCT ASSEMBLY
-
Put together both parts of the base and fix them together with the screws, using a
screwdriver that matches the head screws.
-
Run the power cord through the centre hole of the base after fixing both parts of the base.
The back part is where the power-cord fixing element is.
-
Align the tower fan with the base and fix them with the screws and a cross-head screw
driver.
42
ENERGYSILENCE 8050 SKYLINE SMART
4. OPERATION
Control panel. Fig. 2
1.
On/Off
2.
Power levels
Operating modes
3.
4.
Timer
5.
Oscillation
6.
Display
-
Place your fan on a flat and stable surface. Plug the cord into an electrical outlet. Make
sure that the power supply matches the product voltage. The panel will display the room
temperature.
-
Press the On/Off button to turn the fan on. The pre-set power will be displayed.
-
Press the power level buttons to select the desired power level: Low, Medium, or High. The
corresponding icons will be displayed.
-
To set a desired operating time, from 1 to 12 hours, press the timer button until the desired
time is selected. The selected time will blink on the display for a few seconds, and then it
will switch to the room temperature again.
-
The fan will run for the selected time, up to 12 hours, or until it is turned on via the On/Off
button if no operating time is set.
-
To activate or deactivate the air-oscillation function, press the oscillation button (OSC).
Operating modes
-
Press the operating modes to switch between Natural breeze and Sleep mode.
-
When the Natural breeze mode is selected, the power level will vary from less powerful to
more powerful every 5 seconds.
-
The Sleep mode will depend on the selected power level:
-
When high power is selected, the device will run half an hour at high power, then half an
hour at medium power, and then at low power until the pre-set time has elapsed or until
the fan turns off.
-
When medium power is selected, the device will run half an hour on medium power and
then on low power until the pre-set time has elapsed or until the fan turns off.
-
When low power is selected, the device will run half an hour at low power until the pre-set
time has elapsed or until the fan turns off.
All these functions and configurations can be controlled from the remote control too.
Fig. 3
1. On/Off
2. Oscillation
ENGLISH
ENERGYSILENCE 8050 SKYLINE SMART
43
Publicidad
