Putting On And Adjusting The Battery Backpack - Stihl FSA 130 R Manual De Instrucciones

Ocultar thumbs Ver también para FSA 130 R:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
WARNING
Manage the cord to prevent it from contacting the
cutting/working attachment or catching on objects, which
could cause you to lose balance or control of the power tool,
resulting in serious personal injury and property damage.
The connecting cord can be secured in different positions
and adjusted to suit the height and reach of the operator.
To run the connecting cord through the guide in the shoulder
strap:
2
1
► Insert the connecting cord (1) through the opening (2) on
the side of side of your body where the power tool is held
and controlled.
► Undo the snap fasteners (3) on the shoulder strap and run
the connecting cord through the guide (4).
► Close the snap fasteners to secure the cord in the guide.
To run the connecting cord to the side:
A
B
2
1
1
36
4
3
2
3
► Insert the connecting cord (1) through the opening (2) on
the side of your body where the power tool is held and
controlled (Illustration A or B).
► Secure the connecting cord using the hook and eye
fastener (3).

12.2.3 Putting on and Adjusting the Battery Backpack

WARNING
To reduce the risk of personal injury, the operator must be
able to remove the battery backpack quickly in the event of
an emergency. In an emergency, open and remove the waist
belt and chest strap quickly before dropping the backpack to
the ground.
To ensure a proper fit:
► Put the battery backpack on your back.
► Fasten and adjust the waist belt (2) so that it rests
comfortably but securely on your hips.
► Fasten the chest strap (1) and adjust it so that it fits
comfortably but securely across your chest.
12 Using a Battery Harness
1
0458-725-8621-B

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido