Using A Battery Harness; Stihl Ar Backpack Battery; Positioning And Adjusting The Connecting Cord - Stihl FSA 130 R Manual De Instrucciones

12 Using a Battery Harness

► Remove the rider plate, thrust washer, metal cutting
attachment and thrust plate.
► Remove the stop pin from the hole in the gearbox.
NOTICE
After mounting or removing the cutting attachment, always
remove the stop pin used to block the rotation of the drive
shaft.
12 Using a Battery Harness

12.1 STIHL AR Backpack Battery

12.1.1 Positioning and Adjusting the Connecting Cord

WARNING
To reduce the risk of injury from tripping or losing control of
the power tool, always secure the connecting cord through
the backpack guides and with the hook and eye fasteners as
described below. Position and secure the connecting cord
so that it will not interfere with proper working technique or
your ability to maintain control of the trimmer / brushcutter.
WARNING
Manage the cord to prevent it from contacting the cutting
attachment or catching on objects, which could cause you to
lose balance or control of the trimmer / brushcutter, resulting
in serious personal injury and property damage.
The connecting cord can be secured in different positions
and adjusted to suit the height and reach of the operator.
0458-725-8621-B
A
1
1
1
The connecting cord can run through the guides on the
shoulder straps (Illustration A) or along the back
plate (Illustration B). Secure the connecting cord to the
backpack with the hook and eye fasteners (1) on the side of
the body where the trimmer / brushcutter is held and
controlled. Do not allow the connecting cord to swing across
your body or hang at your side.
C
The length of the connecting cord can be adjusted by
making a loop around the top (Illustration C) or on the side
(Illustration D) of the backpack battery.
English
B
1
1
1
D
33